AC Symptoms
AC Leaking Water: Causes and What to Do
An AC leaking water around the air handler, through a ceiling or onto a closet floor is one of the most common calls in humid Florida. The cause is usually simple, but the water damage can be expensive if it is ignored.
- Why drains clog in Florida
- How to limit water damage
- When to call for service
Where the water comes from
Your air conditioner removes moisture from the air as it cools. That moisture condenses on the cold indoor coil, drips into a drain pan and flows out through a condensate drain line, usually to the outside or into a plumbing drain. In Bradenton and Sarasota summers, a typical home system can produce several gallons of water a day. When any part of that path fails, water ends up where it should not.
The most common causes we find:
- A clogged condensate drain line. Warm, wet and dark, the drain line is the perfect place for algae and sludge to grow. Once it clogs, water backs up into the pan.
- A rusted or cracked drain pan. Older metal pans can rust through, and plastic pans can crack.
- A tripped or missing float switch. Many systems have a safety switch that shuts the AC off when water rises. If there is no switch, or it is not working, the pan can overflow.
- A frozen coil that is melting. When ice on the coil thaws, it can release more water than the pan handles. See AC frozen up.
- A disconnected drain or a missing trap. Fittings can separate, and drains without a proper trap may not empty correctly.
- Sweating ducts or air handler cabinets. Poorly insulated ducts or cabinets in humid spaces can drip condensation on their outside surfaces.
What to do right now
These steps limit damage while you arrange service.
- 1
Turn the system off
Set the thermostat to Off so the coil stops making more water.
- 2
Protect floors and ceilings
Put towels or a pan under drips. If water is coming through a ceiling below an attic unit, move belongings and catch the water.
- 3
Check the drain pan
If you can safely see the pan, note whether it is full. A full pan usually means a clogged line.
- 4
Look outside
Find where the drain line exits. If nothing is dripping there while the system was running, the line is likely blocked.
- 5
Call for service
A technician can clear the line, check the pan and float switch and find out why it clogged.
Can I clear the drain line myself?
Some systems have a cleanout tee near the air handler. Pouring a cup of plain water through it can tell you whether the line flows. Some homeowners also use a wet-dry vacuum at the outdoor end of the line to pull out a clog. If you try that, turn the system off first and do not force anything. If the water will not drain, the pan is rusted, or you see water inside the cabinet, leave it to a technician.
The better fix is prevention. Cleaning and treating the drain line during regular AC maintenance keeps most clogs from forming, and confirming the float switch works means a future clog shuts the system off instead of flooding a ceiling. If you are dealing with a bigger failure, our AC repair service covers pans, drains and the coil.
Not sure where the water is coming from?
Answer a few questions, then add your answers to the booking form so the technician knows what to expect.
Water coming through the ceiling?
Turn the system off and call (941) 919-3792. An attic air handler that overflows can damage drywall and insulation quickly.
Frequently Asked Questions
Why did my AC shut off and the drain pan is full of water?
That is usually the float switch doing its job. When the drain line clogs, water rises in the pan and the switch shuts the system off to prevent an overflow. Clearing the line usually restores cooling, but it is worth finding out why it clogged.
How often should the condensate drain line be cleaned?
In our climate, at least once or twice a year, typically during spring and fall maintenance. Homes with a history of clogs may need more frequent attention.
Should I pour bleach in my AC drain line?
Check your equipment manual first. Some manufacturers recommend against certain cleaners because they can damage parts. Plain water or a product your technician recommends is a safer choice.
Is a small drip from the air handler a problem?
Yes, it is worth scheduling soon. A small drip usually means the drain is partly blocked or a fitting is loose, and it can turn into a larger leak quickly in summer.
Ready to get comfortable again?
Talk to a local HVAC pro who will diagnose the problem, explain your options and give you a straight answer.